UV DTF APPLICATION INSTRUCTIONS
* Clean the surface of your item well where the transfer will be applied.
* Rub front and back of the transfer to make sure transfer is stuck to the transfer sheet.
* Flip transfer over and slowly peel away the rear carrier film in a steady rocking motion. If any
part of the transfer doesn’t come off the carrier sheet, place the transfer sheet back over it
and rub it again.
* Carefully place the transfer on the item. The transfer is permanent once it touches the
surface and you will not be able to reposition it so make sure you have it where you want it
before letting it make contact.
* Press the transfer down working from the center outwards pushing out any bubbles.
* Rub over the entire surface of the transfer with your fingers, credit card, scraper for 20-30
seconds to ensure it has been pressed down evenly and it well stuck to the surface.
* Working from the outside corner, slowly peel the clear film off.
CARE INSTRUCTIONS
If required, hand washing is best but transfers will withstand being in the TOP RACK of a dishwasher
that has a maximum temperature of 170 degrees. Transfers are microwave friendly.
*For glassware, let cure for a minimum of 72 before using with cold liquids that may create
condensation on glass.
